Best Professional Chainsaw

10 Best Professional Chainsaw in 2021 – Reviews & Buying Guide

The best professional chainsaw generates greater power for heavy-duty performance, but the choice of this powerful equipment is huge in today’s market.

Chainsaws became a popular tool for homeowners when Robert McCulloch introduced the first lightweight model in the ’60s.

It comes in a variety of engine sizes, bar lengths, and handle configurations. It is important to select the right tool for the job you need to accomplish.

The equipment that works for you depends entirely on your level of experience. It will be ill-advised for a beginner to pick a model with a 70 cc instead of a 40 cc engine.

Instead, you should make a conservative choice that will give you the ideal power and features to perform the task at hand with ease.

In this review, we will present the top ten chainsaws on the market. So, stay tuned if you want to know what chainsaw will work for you.



Best Professional Chainsaw: Editor’s Top Picks


Top 10 Best Professional Chainsaw Reviews:

1. Husqvarna 20-Inch 455 Rancher Gas Chainsaw

Husqvarna 20 Inch 455 Rancher Gas Chainsaw


The Husqvarna 20-Inch 455 Rancher is our overall best professional chainsaw on the market. It runs on a 55.5 cc 3.5 horsepower gas engine.

It is the perfect replacement option for aging 142 and 460 models. The gas-powered engine delivers sufficient power for cutting big trees.

It features felling marks for distinct felling precision. It has an x-torq engine that delivers lower fuel consumption and reduced exhaust emission levels.

This Rancher Chainsaw has a quick-release air filter as well as a combined choke/stop control.  These features allow for easy starting and reduce the risk of engine flooding.

There’s an air injection system that extends the interval between filter cleanings. This greatly improves efficiency while increasing engine life.

The whole system is engineered to minimize vibration during operation. This lessens fatigue, allowing you to work on a project for extended durations.

The minimum and maximum recommended bar lengths are 13 and 20 inches respectively. The oil tank capacity of 0.68 US pint requires a few full tanks to complete a project.

You also have a side-mounted chain tensioner that allows you easy access to the chain tensioning device.

Highlighted Features:

  • 55.5cc, 2-cycle, gas-powered engine
  • Inertia activated chain brake for added safety
  • Automatic chain oiler provides a steady bar and chain lubrication
  • A quick-release air filter allows for easy cleaning/replacement
  • Easy to use side-mounted chain tensioning

Check Latest Price


2. Dewalt DCCS670X1 60V Cordless Chainsaw


The Dewalt DCCS670X1 is a heavy-duty battery-powered chainsaw. The X1 at the end of the model number means that the tool comes with a flex volt battery.

The battery is 9 amp-hours in its 20-volt state and 3 amp-hours in its 60-volt state. This tool is rated at 60 volts only. So, you’re working with 3 am-hours.

The chainsaw has a 16-inch Oregon bar and chain. The chain is a low kickback, which means it is not going to be a very aggressive chain.

This flexible tool is very similar to the 40-volt model that Dewalt has out for its commercial line. This model is ideal for trimming off 6 by 6, 4 by 4, or beams.

Dewalt incorporated a nice tool-free chain tensioner. You can simply loosen or tighten the chain tensioning device for effective settings.

You also have an auto oiling chain system. You can put just about any oil in there that you would like. We prefer using a thicker chain lubricant to avoid leakages.

As far as safety is concerned, you have a chain brake lever that turns the power to the motor when you put it in the forward position.

Highlighted Features:

  • Ergonomic and lightweight design
  • Uses a 60-volt MAX battery
  • Backward compatible with 20-volt MAX battery
  • Automatic oiling for continuous lubrication
  • Chain brake for kickback protection
  • Tool-less bar tightening and chain tensioning


3. Greenworks 16-Inch 40V Cordless Chainsaw

Greenworks 40V 16' Brushless Cordless Chainsaw (Great For Tree Felling, Limbing, Pruning, and Firewood / 75+ Compatible Tools), 4.0Ah Battery and Charger Included


The Greenworks 16-Inch 40V Cordless Chainsaw is surprisingly powerful for how lightweight it is. It is a cutting powerhouse for professionals.

It is the ultimate battery-powered equipment. The powerful 40-volt lithium-ion battery system is the industry’s largest, and powers over twenty-five tools.

The rechargeable lithium-ion battery uses cutting-edge technology to deliver maximum power. The electric start is easy to use and it is ultra-quiet with minimal vibration.

The brushless motor generates less vibration for stress-free operation. Also, the brushless motor gives up to 30 percent more torque for superior cutting.

The Greenworks Cordless Chainsaw has an incredible torq that is perfect for cutting branches, logs, and limbs with ease.

It has a tool-less chain tensioning. All you have to do is turn the thumbwheel counterclockwise in order to tighten the chain.

The automatic oiling system applies oil to the chain to ensure resilience and extend the life of the chain. Automatic oiling is also a blessing when a cutting project needs your undivided attention.

Safety is guaranteed when using this tool, thanks to the low kickback chain and chain brake. The electronic chain brake system ensures there’re no accidental kickbacks.

The cordless design provides you with a hassle-free operation since there is no cord, no gas, and no maintenance.

Highlighted Features:

  • Brushless motor design has less vibration
  • Low kickback chain and chain brake for enhanced user safety
  • Compatible with G-MAX 40-volt li-ion system
  • Tool-less chain and bar tensioning
  • Delivers up to 150 cuts per single charge

Check Latest Price


4. Black + Decker 40V Max Cordless Chainsaw


The Black + Decker LCS1240offers the convenience of cordless use with the needed power and performance for cutting through live logs and dry wood.

You will appreciate the convenience of the tool-less chain tension feature for quick and easy chain adjustments during the job. It is the best-selling chainsaw in the market.

All you have to do is simply rotate the inner dial to unlock the bar, and turn the outer dial to adjust the chain’s tension for optimum cutting efficiency.

This chainsaw is fitted with a premium 12-inch Oregon low kickback bar and chain, running at 5 meters per second for a fast-cut speed.

The automatic oiling system eliminates priming and guarantees your bar and chain receive the perfect lubrication. The clear window allows you to gauge the oil level.

This 40-volt chainsaw provides power, runtime, and versatility – all without the weight, noise, and hassle of gas-powered equipment.

At 10.4 pounds, the chainsaw is lightweight for easy carry. Its full wrap-around handle provides a comfortable grip in cutting applications.

The brand has put high power in a small compact lithium-ion battery with a long life. This tool makes over sixty cuts on 4 by 4 pine lumber on average per single charge.

Highlighted Features:

  • Lithium battery holds charge up to eighteen months
  • Powerful motor delivers 60+ cuts on a single charge
  • Full wrap-around handle for added comfort
  • Tool-less chain tensioning for quick adjustments
  • Automatic oiling for constant bar and chain lubrication

Check Latest Price


5. Dewalt DCCS620P1 Cordless Chainsaw

DEWALT 20V MAX* XR Chainsaw Kit, 5-Ah Battery, 12-Inch (DCCS620P1)


The Dewalt DCCS620P1 Cordless Chainsaw is compact and lightweight with a 12-inch bar and chain for ease of use and handling on smaller cutting applications.

It has a fixed automatic oiler that applies sufficient oil to the chain for smooth operation. Self-oiling is an invaluable feature when working on extended projects.

The chainsaw has a brushless motor delivering powerful performance. The 20-volt 5 AH battery delivers an extended runtime of about ninety cuts per charge on a 4 by 4 lumber.

You have a rubber over-mold atop handle with a single-speed trigger. There are a plastic fore handle and a pretty standard chain and kickback brake.

When using the tool, you have a lot of room for maneuverability. If the tool is turning and you push the chain brake, it will immediately and mechanically stop the chain.

But when the brake is in the forward position, it will also stop the motor from turning on altogether.

There is a tool-less tensioning system for quick bar and chain adjustment. You can easily loosen or tighten the chain with a few counter-clockwise turns.

With no gas to operate, it starts with a pull of the trigger, eliminating any cold start and carburetor issues that can come with gas-powered equipment.

Highlighted Features:

    • High-efficiency brushless motor enhances runtime
  • Lightweight, compact design improves maneuverability
  • Tool-less bar tightening and chain tensioning
  • Low kickback Oregon chain and bar
  • Gives up to ninety cuts on a single charge

Check Latest Price


6. Poulan Pro PR5020 20-Inch Gas Chainsaw

Poulan Pro 20 in. 50cc 2-Cycle Gas Chainsaw, PR5020


The Poulan Pro PR5020 20-Inch Chainsaw comes equipped with unique features. With a powerful engine, this model can tackle almost anything.

It is fitted with a 20-inch low kickback bar and chain. This combination is ideal for cutting down medium to large trees and limbs.

The PR5020 comes with a powerful 50cc 2-cycle gas engine that is reliable and long-lasting. The engine’s patented technology ensures efficient fuel intake and reduced emissions.

The chain tensioner is conveniently mounted on the side. The tensioning system is easily accessible for quick chain adjustments.

There is tool-free service access for fast, easy access for spark plug and air filter changes. This allows for hazard-free routine service and maintenance.

The tool comes with an effortless pull starting. The spring-assisted pull cord along with the easy-access purge bulb guarantees simple, fast starts with fewer cord pulls.

The equipment features an ergonomic design with a cutting-edge anti-vibration system. This allows for superior comfort and lessens user fatigue.

The chain brake will immediately stop the chain in the event of kickbacks.

Holding the chainsaw is super easy with the front handle. There’s also the in-handle for added stability during use. The in-handle also has easily accessible onboard storage.

Highlighted Features:

  • Uses OxyPower engine technology
  • Effortless pull starting
  • Comb tool incorporated into the rear handle
  • Ergonomic combined stop/choke control
  • A protected purge bulb reduces the risk of damage

Check Latest Price


7. Remington RM4620 Outlaw 20-Inch Gas Chainsaw


The Remington RM4620 Outlaw 20-Inch Chainsaw is the ideal tool for big cutting jobs. This tool is available in five different bar and chain sizes apart from the 20-inch bar and chain.

Pro-grade components and die-cast chassis enhance durability. The low kickback chain boosts all-around superior performance.

Remington has included a very powerful 46cc 2-cycle engine. The heavy-duty engine has a Quick-Start technology, making pull starts much easier.

The 20-inch bar and chain size allow you to tackle big cutting jobs without using too much oil. The adjustable auto oiler ensures the chain runs smoothly during continuous use.

There’s a strong side-access tensioner that helps you maintain consistent tensioning for longer durations of time. This is suitable for heavy projects, such as storm clean-up.

Cushioned front handle and in-handle feature five-point anti-vibration technology that helps to reduce hand fatigue and increase control.

The automatic oiler keeps the chainsaw properly oiled. Auto oiling eliminates friction, keeping the chain from wearing out and dulling faster.

There is a quick-release air filter. Therefore, you don’t have to wait for your chainsaw to stall or slow down, just clean the filter right away.

Highlighted Features:

  • Quick start technology allows for easy pulling and starting
  • Five-point anti-vibration system for added comfort
  • Tool-less access to the spark plug and air filter
  • Cushioned wrapped handle for comfort
  • includes 2-cycle oil and heavy-duty carry case


8. Echo 18-Inch 40.2cc Gas Chainsaw

Chain Saw, Gas, 18 In. Bar, 40.2CC


Are you in search of a value price chainsaw that gives reliable cutting results? Look no further than the Echo 18-Inch 40.2cc Gas Chainsaw.

This chainsaw comes equipped with a 40.2cc engine. The engine is a 2-cycle and it takes a 50 to 1 gas to oil mix ratio for superior performance.

The chassis of this Echo saw is engineered smaller when compared to other saws in its range. However, it is resourceful for moderate and heavy-cutting jobs.

The sprocket type on this saw is a spur. It has the advantage of good bark and chip removal but tends to cause more wear on the saw chain.

It has an automatic or adjustable oiling system that keeps the chain lubricated at all times. The automatic oiler is always adequate provided that you remember to fill the oil.

The fuel capacity on this chainsaw is about 13.9 fluid ounces and the oil capacity is about 9.5 ounces. This is enough for several tenfold cuts.

The air filter is located underneath the cover on the top. All you have to do is unscrew the cover to access the filter. You can remove the filter by unscrewing the plastic piece.

Highlighted Features:

  • Professional grade two-cycle engine
  • Anti-vibration design reduces hand fatigue
  • Metal bucking spikes enhances user control
  • 16-inch and 18-inch bar lengths are available
  • G-Force engine air pre-cleaner

Check Latest Price


9. Hitachi CS51EAP 50.1cc 20-Inch Chainsaw


The Hitachi CS51EAP is engineered for professional and commercial use. It is the go-to cutting powerhouse when dealing with large trees.

It comes with a 50.1 cc pure fire engine that is commercial grade. This engine gives a clean and powerful performance with low fuel consumption and fewer emissions.

What is probably most impressive about this chainsaw is the decompression valve. It makes starting the equipment remarkably easy.

The sprocket nose bar and bumper spikes boost control for fast and easier cuts. This feature along with the 20-inch bar and chain allows you to cut easily through thick logs and trees.

Another thing that makes this product one of the best 50cc professional chainsaws is the side-access chain tensioning system that is simple to operate.

The automatic and adjustable oiler ensures that your cutting operations run smoothly until you are done with the job. Just make sure you remember to refill the oil for continuous lubrication.

The saw has a half throttle choke along with a quick trigger release that allows for an easy start as well as a warm-up.

You also have a spring-type system for eliminating any handle vibration. This helps to lessen fatigue and enhance user comfort.

Highlighted Features:

  • Commercial-grade pure fire engine
  • Decompression valve allows for easy starting
  • Sprocket nose bar and bumper spikes provide added control
  • Tool-less access to the air filter
  • Anti-vibration system for less fatigue and user comfort


10. Craftsman CMXGSAMY426S 20-Inch Gas Chainsaw


At first glance, the Craftsman CMXGSAMY426S 46cc 2-Cycle 20-Inch Gas Chainsaw looks like a professional saw that can handle heavy cutting jobs.

Powered by a 46cc 2-cycle gas engine, the tool runs considerably powerful than the conventional chainsaw. The engine is also fuel-efficient with reduced emissions.

The saw has a 20-inch low kickback chain and guide bar, which are perfect for cutting small, medium, as well as large trees and limbs.

The Craftsman design is ergonomic and it features remarkable anti-vibration features. With minimized handle vibration, you experience less fatigue and more comfort.

There is an automatic and adjustable oiler that does a great job of keeping the chain and bar working properly, especially during long hours cutting jobs.

A special attribute of the Craftsman CMXGSAMY426S chainsaw is the inertia-activated chain brake. This brake will immediately and automatically stop the chain in case of any kickbacks.

Another feature that makes this saw easy to maintain is the tool-less access to the spark plug and filter. You just have to loosen a few parts with your hand to gain access.

In addition, you have a side-mounted tensioning system. All you have to do is tighten or loosen the bolt to adjust the tension.

Highlighted Features:

  • High output engine
  • Easy start and comfortable engagement
  • Low kickback and greater control
  • Automatic and adjustable oiling system
  • Tool-less access to spark plug and filter



Things to Consider When Buying Professional Chainsaw


Professionals need the high-cost features of an expert lumbering saw. The most important considerations are:

Easy starting

Smooth running in any position

Reasonably lightweight design

An appropriate chain length for your job

All the aforementioned benefits are achievable if you choose the best professional chainsaw with respect to the following pointers.

  • Handle Orientation

It is important to select the right tool for the job you need to accomplish. There are two basic handle orientations: top handle and rear handle.

Top handle orientation allows you to control the saw from the top of the unit. This type of saw is designed primarily for working in tree or low-hanging branches.

Rear handle chainsaws are the most popular for all-around use because they feature both front and rear handles. The handles are spread apart to provide greater control.

According to most chainsaw reviews, top handle configurations are the most ideal choice for professional loggers and arborists.

Top handle models are great for professionals who do the cutting job from the top of the tree. They have a lightweight design that allows for maximum maneuverability.

This means you can access hard-to-rich spots and still work efficiently and safely. On the other hand, rear handle models are best suited for groundwork, and homeowners can use them.

  • Engine Size

If you choose to buy a gas-powered saw, then you need to know that quality starts with the engine. Are the crankshaft and rod forged or cast?

Does the rod run on its own metal, on antifriction bearings, or on a bushing? What about the main bearings and thrust bearings?

The best all-around professional chainsaw comes with antifriction roller bearings, ball, or needles.

Top-grade saws are normally rated several thousand RPM higher compared to their lower-rank counterparts.

If you are a beginner, you should select chainsaws in a 30 to 40 cc displacement range in a rear handle configuration.

Heavy-duty applications may require 40 to 60 cc engines. Professional loggers who have extensive experience can use 40 to 70 cc chainsaws or higher.

  • Bar Length

It is a good rule of thumb to pick a unit whose bar length is one to two inches longer than what you will be cutting.

So, if you are cutting a 14-inch log, you want to consider at least a 16 to 18-inch bar and chain. You will also need a 16 to 18-inch bar and chain when cutting a 10-inch log.

Only use bar and chain combinations that are recommended by the chainsaw manufacturer. Therefore, make sure you consult your owner’s manual.

If you need to replace your bar and chain, ensure you have the appropriate bar and chain combination as per the owner’s manual.

  • Oiling System and Air Filter

A good chainsaw must have a good oiling system to ensure that the chain is always lubricated during use. The better the lubrication, the longer the chain and bar will last.

Always choose a saw with an automatic/adjustable oiler. This type of system allows you to adjust the oil amount depending on the job at hand.

The best Stihl chainsaw will have an automatic oiling system that is designed to reduce oil consumption by as much as 50%.

You also need a good air filtration system. Look for a chainsaw with a large air intake, which brings a maximum amount of cooling air.

Make sure the air filter is pleated or a felt type where the edges are covered with rubber and prevent dirt entry. Also, ensure the air filter is tool-free for easy cleaning.

  • Safety and Comfort Features

There are several safety features you should look for when shopping for the best-rated professional chainsaw.

Make sure the saw is fitted with a chain guard that will prevent the chain from slipping off. A rear handguard for protecting your hand in case the chain comes off the bar.

Kickback is one of the most dangerous occurrences when using a chainsaw. This refers to the reaction that takes place when the moving chain comes into contact with a solid object.

When kickback occurs, the act of the chain cutting/trimming force generates a turning pull on the chainsaw in the direction that is reverse of the movement of the chain.

You may not be able to entirely prevent kickback, but you can choose a saw that is fitted with a low kickback chain.

The next important feature that can help you prevent kickback is a chain brake. There are two types of chain brakes: inertia and manual.

You must activate manual chain brakes by hand. On the other hand, inertia chain brakes are activated when you throw your chainsaw backward.

Between the two types of brakes, we consider inertia chain brakes to be the safer option.

In addition, select a chainsaw with a good vibration reduction system for easier comfort. It should also have an electronic ignition for easier starts.


Types of Chainsaws

There are three major types of chainsaws depending on how they are powered. They include gas-powered, electric-powered, and battery-powered.

  • Gas-Powered Chainsaws

They give more power, longer cutting bars, and long-term use in remote areas. They are characteristically heavier than electric-powered models.

Gas-powered models are suitable for large/heavy cutting jobs. They are ideal for cutting bars that range from fourteen to thirty inches in diameter.

A 16 to 20-inch bar and chain would probably suit the needs of most professionals. You must also know that these saws are remarkably noisy and they can release a lot of emissions.

These saws have 2-cycle engines. Therefore, they need a special gas-oil mix ratio to run optimally.

  • Electric-Powered Chainsaws

Electric-powered chainsaws are easy to use. You will not have to put up with the hassle of carrying 2-cycle gas around when working in the woods.

Electric saws are ideal for homeowners who have occasional needs for chainsaws. They are the perfect choice for cutting branches and small limbs.

However, they may not be suitable for professional use. The length of the power cord limits the maneuverability of these saws.

Therefore, they are not ideal for working in trees and cutting small hanging branches.

  • Battery-Powered Chainsaws

Battery-powered chainsaws give convenience and they are remarkably lightweight. They definitely pack a good amount of power, but the power is usually short-lived depending on the application.

A fast charger would lessen the charge time. However, the best use for these saws is pruning jobs and small cleanups.

Only a few models with heavy-duty batteries can be used professionally to complete big jobs. Most conventional models are rated at 40 volts. Reliable battery-powered chainsaws are rated at 60 volts and 80 volts.

Let’s compare two different batteries based on their voltages: 40-volt and 80-volt. They are both max voltages of the batteries and not the nominal voltage.

For the 40-volt chainsaw, the nominal voltage is roughly 36.5 volts. For the 80-volt chainsaw, the nominal voltage is around 72 volts.

This simply means that the 40-volt saw has a watt-hour capacity of 146 watt-hours. The 80-volt saw has a watt-hour capacity of around 144 watt-hours.

The advantage of the 80-volt saw over the 40-volt one is the charge time. The 80-volt battery charges faster, roughly 30 minutes compared to 2 hours of the 40-volt battery.


How to Maintain a Professional Chainsaw

  • Visual Inspection

Take responsibility for the maintenance of your chainsaw. Before using your check to see if it is in proper working order.

The saw must be in good condition with a sharp chain. An improperly filed chain is a common cause of kickback accidents.

Make sure the chain tension is sufficient. At no point should the chain hang from the bar. Check that the chain brake works for guaranteed safety during use.

You must check and fill your saw with chain oil regularly. If you are dealing with a gas-powered saw, make sure it is filled with fuel before you put it to use.

You must be careful when filling a saw that has been recently used. A hot muffler or motor could ignite the gas.

NB: If there is any doubt about the condition of your chainsaw, tag it or make see that it is repaired to ensure your safety.

  • Adjust Chain Tension

There are three basic variations for adjusting your chain tension, depending on what type and model you have.

The first design is adjusting with the front-mount adjusting screw. The second design has a side-mounted adjusting screw. The third design has a quick chain adjustment that requires no tools.

The technique for achieving the correct chain tension would be the same for all three chain adjustment options. What is different is how you access the adjustment mechanism.

The first thing that you will need to do is to make sure that the chain brake is disengaged. Then loosen the bar to have a slight up and down movement.

Holding the tip of the bar up, rotate the adjustment mechanism clockwise until the chain is in tight contact with the bar.


Safety Tips on Using a Professional Chainsaw

Modern chainsaws have become relatively easy to use and extremely efficient. They can also be extremely dangerous.

You can avoid injuries with proper safety training and by following a little advice from the experts. Here are our expert safety tips:

  • Choose the right size saw

Professionally, you need a saw with a bar and chain length of 16 to 20 inches. This will allow you superior maneuverability without being too heavy.

A mid-sized is safe for cutting wood on the ground, while a lightweight option is safe for cutting smaller limbs and chores.

  • Wear protective gear

You might overlook this safety precaution, but it is one of the most important considerations when working on larger cutting jobs.

You can only be fully prepared to cut down trees and clean up after a storm if you wear appropriate protective gear.

You should always be wearing protective chaps, eye and ear protection, work gloves, a helmet, and protective footwear.

NB: Please avoid loose-fitting outfits.

  • Inspect the chainsaw before use

As we mentioned earlier, visual inspection is key to proper maintenance and safety. Ensure the chain is not sagging to avoid kickback.

Check and confirm that either the manual or inertia chain brakes are in good working conditions.

The chain should be sharpened and properly oiled. It is much safer to operate a saw that has an automatic oiler. This way, you will never work with a dry chain and bar.

  • Start Safely

The safest way to start a chainsaw is by starting it on a flat surface. Make sure nothing is obstructing the bar and chain. You should even place your foot on the rear handle.

  • Beware of kickback

You should never remove or modify the chain brake. It is specifically engineered to reduce the effect of kickback and prevent injuries.

Always take a considerable amount of time to go through the user manual. The manufacturer’s instructions are failsafe safety tips.


FAQs: Frequently Asked Questions About Professional Chainsaw


Q1. Why Does My Chainsaw Flood?

  • There could be a number of causes for this occurrence, such as a wet spark plug, poor carburetor calibration, or an incorrect fuel mixture.
  • The most likely cause of flooding would be an incorrect ratio of petrol to oil mixture. A lean mixture provides poor lubrication, while an over-rich mixture produces a smoky exhaust.
  • Also, a poor starting position can cause the saw to flood, especially when you pull the rope more than three times.

Q2. How Can I Replace the Chain on My Saw?

  • Before you replace the cutting chain on your chain saw, make sure the engine has cooled down. The on/off switch should be in the off position.
  • Use the provided wrench to help loosen as well as unthread the nuts that secure the clutch cover. Confirm that the chain brake is disengaged and remove the cover.
  • Lift off the chain guard and remove the old chain is still intact. Align the new chain on the sprocket and the chain bar.
  • Make sure the teeth are facing towards the front end of the chain bar on the top, and away from the front end on the bottom.
  • Reposition the chain guard, reinsert the clutch cover, and then tighten the nuts. Lift the bar and rotate the adjustment screw clockwise until there is no slack in the chain.

Q3. What is Kickback?

  • Kickback refers to a sudden reaction that forces the bar of the saw to jump off a specific object and towards you. You can experience two forms of kickback: rotational or linear.
  • Rotational kickback occurs when the upper quadrant of the bar tip contacts an object during operation. This transfers all of the chain’s energy to the saw, which then revolves back.
  • Linear kickback occurs when the chain is pinched by wood on either side. The whole chainsaw can easily be thrown back towards you at full speed.

Q4. Does the Weight of a Chainsaw Matter?

  • The weight does matter when selecting the best professional chainsaw. Less weight means less fatigue, easier and safer handling. The bigger brand names tend to have the edge here.

Q5. What Protective Gear is Appropriate for Chainsaw Protection?

  • It is important to wear proper safety equipment while operating and to read and fully understand the safety manual.
  • Sturdy work boots protect your feet from debris and other elements within your working environment. They also provide good footing.
  • Leg chaps contain pads of cut retardant materials designed to assist the wearer in reducing the severity of injury from running gas-powered chainsaws.
  • The degree of protection varies with the speed of the chain, the time and angle of contact, the power and torque of the saw, and the design of the sprocket.
  • Chaps come in varying lengths. Ensure to select a pair that provides protection at least to your boot tops. Always keep in mind safe operating practices.
  • Safety gloves protect your hands from flying debris and chips. Also, the gloves reduce the effects of vibration.
  • A safety helmet with built-in face, eye, and ear protection provides safety from flying debris and reduces chainsaw sound level to your ears.

Q6. How Do I Clean the Air Filter?

  • Your brand new chainsaw is equipped with a precision engine that you can easily render useless with a dirty air filter.
  • Before removing the filter, apply the choke to close off the carburetor throat in order to prevent the entry of foreign matter.
  • Then remove and inspect the filter for damage and penetration of foreign material. If the filter is in good condition, clean it as per the manufacturer’s recommendations.
  • You can further clean many filter assemblies in warm soapy water and then dry them properly. But you should always replace a damaged filter.

Final Verdict

Chainsaws are versatile, time-saving, and very powerful tools. It is important that you match the right saw with the job that you have to do and your experience level.

Always remember to ask yourself the following questions. How experienced am I using a chainsaw? What do I plan to cut with my chainsaw? How big is the cutting job?

If you are a professional, the simplest answer to all three questions would be to get a powerful saw that is equipped for heavy-duty applications.

Choose a tool that fits your hand for good control. In this case, we recommend top handle configuration, especially if you will be cutting in trees.

Scroll to Top